Location = Federal Territory Kuala Lumpur
Design ARI = 100 Years
Area (hectar) = 10
Tc (min) = 30
Step 1:- Start MSMAware. Select “General Setting”.
Step 2: Insert the value of area, catchment, tc and no of isochrones.
Step 3:- Select “Time area method” tab.
Step 4: – Select “Catchment weight losses” tab.
Step 5: – Enter the value of initial losses for impervious and pervious.
Step 6: – Enter the value for percentage of impervious and pervious. The value of continuous losses and initial losses will be calculate automatically.
Step 7: – Select “Interpolation of TA diagram” tab.
Step 8: – Enter the value total area for each isochrones according to number of isochrones. Click “add” button, if there is more than 3 numbers of isochrones. Make sure that area is in cumulative area.
Step 9:- Select “TAM Input” tab and choose MSMA1.
Step 10: – To get the data for temporal pattern, refer steps as shown in temporal pattern tutorial.
Step 12: – Click “generate table” button to generate the list of table.
Step 13: – Select “tc” according to site project. Make sure that the number of isochrones and ‘Pt” values same as the project data.
Step 14:- Click “Run” button to get the data for time area method.
Step 15:- The result for time area method will be shown as bellow.